ESXi has some commands with esxcfg prefix for doing some advanced tasks on shell. Of course, you can do the tasks by ESXCLI commands but the esxcfg commands are useful. Let’s review some of them: esxcfg-advcfg You can use this…
If you have C-Class enclosure in your environment and you have plan for upgrading OA firmware to 4.30 (or later) or you have installed OA module with 4.30 (or later) firmware, you need to configure delay time in “Device Power…
I had a problem on some of our View Connection servers, the servers consumed high CPU and memory and View Connection Server service had crashed after some hours. As I checked on View debug logs (VMware View log files location),…
Achieving best performance on ESXi by HP ProLiant servers needs to change some default configuration on HP RBSU (ROM-Based Setup Utility) or UEFI (Unified Extensible Firmware Interface). Some of the configurations have been mentioned on “Performance Best Practices for. VMware…
How much do you know about HP ASR? How it works? The ASR feature is a hardware-based timer. If a true hardware failure occurs, the Health Monitor might not be called, but the server will be reset as if the…
Veeam BR informing you about backup job and backup infrastructure performance when job is finished and you will see a window same as the below: Load: Source 54% > Proxy 27% > Network 47% > Target 33% Primary bottleneck: Source What…