Hardware Status Problem on HPE ProLiant Gen10

The Hardware Sensor Status Reported in the vSphere Web Client

Do you have any HPE ProLiant Gen10 on your virtual environment?

Did you upgrade their iLO firmware to 1.30?

If you have the servers with upgraded iLO firmware, you may face with the below status on Hardware status tab in vSphere Web Client:

VMware vSphere 6.0

VMware vSphere 6.5

VMware vSphere 6.7

Good news, HPE engineers are working on this issue and it has no impact on production.

It can be safely ignored but I recommend that install the new firmware after release.

Davoud Teimouri

Davoud Teimouri is as a professional blogger, vExpert 2015/2016/2017/2018/2019, VCA, MCITP. This blog is started with simple posts and now, it has large following readers.

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to our newsletter and join other subscribers

Holler Box