If you have plan to deploy vCenter Server Appliance (vCSA) without DNS server, installation will be failed, if you have add standard information for deploying virtual appliance. Because installer ask you to add FQDN of server before start to deploy. By adding FQDN, installer will be try to resolve it.
Tagged: How To
HPE Management Component Pack or HPE MCP provides agent software for use on community-supported distributions. The MCP (unlike the SPP) does not provide drivers and firmware (firmware is provided via HPSUM, and drivers are provided by the distribution vendors). The Linux Service Pack for ProLiant provides updated drivers and agent software for use on RedHat Linux and SUSE Linux Enterprise Server.
VMware has explained the solution on this KB article: https://kb.vmware.com/s/article/1035107
To resolve this issue:
Restart the system.
During the reboot, when the hypervisor screen appears, press Shift+O.
In the boot option, type overrideDuplicateImageDetection and press Enter.
No network Adapter issue actually will be happened during installation, if the server has no adapter or the adapter driver is not loaded or the image is not contains of any compatible adapter driver, ESXi installer does stop installation and prompt
Soft Diagnostic Failure A soft diagnostics Error will typically be present after an intentional or unintentional restart of one or both HSV controllers. It will be logged in the controller event log and displayed...