Service Pack for ProLiant (SPP) Version 2019.09.0

HPE has released latest of SPP (Service Pack for ProLiant (SPP) Version 2019.09.0), the new release is including latest version of firmware and drivers for supported servers and components.

This SPP does not contain second generation AMD EPYC processor updates. The ROMs included in this SPP should not be used to update these processors.

This will be the last SPP to support vSphere 6.0

Release Summary

The 2019.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9 and Gen10 server platforms and options. The 2019.09.0 SPP Production release provides support for:

  • VMware ESXi 6.5 U3
  • VMware ESXi 6.7 U3, U2
  • Red Hat Enterprise Linux 8, 7.7
  • SUSE Linux Enterprise Server 15 SP1
  • Smart Update Manager 8.4.5

This SPP 2019.09.0 release supersedes the SPP 2019.03.1. 

Resolved CAs

DateCA NumberDescriptionFixed SPP Version
8/26/2019a00069344(Revision) HPE Network Adapters – HPE QLogic NX2 Online Firmware Upgrade Utility for VMware 6.7 Version 2019.03.01 May Fail to Complete In the SPP, When an HPE QLogic Fibre Channel Network Adapter Is Configured on Gen9/Gen10 Servers2019.09.0
7/26/2019a00078768HPE StoreFabric Host Bus Adapters – During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels2019.09.0
6/12/2019a00071158(Revision) HPE Gen10 Smart Array Controllers – Disks May Go Offline And Out of Memory/APD Conditions May Be Experienced on HPE Gen10 Servers Configured With Certain HPE Smart Array Controllers Running In a VMware vSAN Environment2019.09.0
5/22/2019a00073851HPE Dynamic Smart Array B140i Controller – HPE Servers Running VMware ESXi 6.0/6.5/6.7 and Configured With an HPE Dynamic Smart Array B140i Controller May Experience a PSOD When Updating to Hpdsa Driver Version 5.5.0.662019.09.0
4/18/2019a00070779HPE Solid State Drives – Certain HPE SAS Solid State Drives May Fail Within a Few Days of Install With Timeout Messages in the Serial Log if a Very Small Amount of Data Is Written to the Drives and They Are Left Powered-On2019.09.0
4/2/2019a00069761VMware – Service Pack for ProLiant (SPP) Version 2019.03.0 May Fail to Update on HPE ProLiant Gen10 Servers Running VMware ESXi 6.5 Using Integrated Smart Update Tools (iSUT) Version 2.3.62019.09.0
3/19/2019a00066514HPE Hard Disk Drives – FIRMWARE UPGRADE REQUIRED For Certain HPE 7.2K (2TB/1TB) SATA Hard Disk Drives to Prevent a Potential Data Integrity Risk2019.09.0

More Information

The below links provide more information about this release:

Further Reading

Service Pack for ProLiant (SPP) Version 2019.03.0

HPE Service Pack For ProLiant 2018.09.0 (HPE SPP)

[Review]: HPE Service Pack For ProLiant 2018.06.0 (HPE SPP)

Davoud Teimouri

Davoud Teimouri is as a professional blogger, vExpert 2015/2016/2017/2018/2019, VCA, MCITP. This blog is started with simple posts and now, it has large following readers.

3 Responses

  1. Jason says:

    Hi, is this d.l available?

  1. 13/09/2019

    […] Service Pack for ProLiant (SPP) Version 2019.09.0 […]

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to our newsletter and join other subscribers

Holler Box